Request for Quotation for Aluminum Alloys

Dear Sir/Madam,

We VISION INC are a trading company operating here in Pakistan. Currently we have a requirement from one of our clients in Pakistan for the below material.

Would appreciate if you can confirm if you manufacture below mentioned items. If yes then please share FOB quotation for the same.

1. ALUMINIUM STRIP

• (AL=99.50% MIN.)
• SIZE:450 X 32 X 12 MM. B.S 1470, DESIG. 1050 A,
• CONDITION “O”.DRG AA-3058-2PD TO AA-3062-2PD
• QUANTITY 4800 KG

2. ALUMINIUM STRIP

• (AL=99.50% MIN)
• SIZE:450 X 26 X 7 MM. BS 1470 ,
• DESIG. 1050A,COND “O” DRG NO.AA-3839-GF
• QUANTITY 1500 KG

3. ALUMINIUM ALLOY ROD

• QUANTITY REQUIRED= 900 KG
• DIA 12 MM – 0.7 MM
• LENGTH 3000 MM
• GB/T 3191-1998 MAT NO 7A04.T6
• CHEMICAL COMPOSITION
• Cu:1.4-2.0% Mg:1.8-2.8%,
• Mn:0.2 -0.6% Fe:0.50%,
• Si:0.5% Zn:5.0-7 %,
• Cr: 0.10-0.25%,Ti=0.10%
• Other Impurity
• Every kind 0.05%,Total 0.10% Al= Remain
• MECHANICAL PROPERTIES.
• Tensile Strength=490 MPa Min.,
• Yield Strength=370 MPa Min,
• Elongation=7% Min.,

1. ALUMINIUM ALLOY EXTRUDED BAR

• QUANTITY REQUIRED= 161,000.00 KG
• DIA 130 MM – 2.5 MM,
• LENGTH KG= 2030 + 10 MM
• GB/T 3191-1998 MAT NO 7A04.T6
• CHEMICAL COMPOSITION
• Cu:1.4-2.0% Mg:1.8-2.8%,
• Mn:0.2 -0.60% Fe:0.50%,
• Ti = 0.10%
• Si : 0.50% Zn 5.0-7.0%,Cr: 0.10-0.25%
• impurity every kind 0.05%,Total 0.10%
• Al = Remain
• MECHANICAL PROPERTIES
• Tensile Strength=530 MPa Min.
• Yield Strength=400 MPa Min,
• Elongation=6% Min

Regards,

Amer Zaman

VISION Inc