Hi Team

Pls quote

C18150 cuczr

66x300x1000 mm- 500 kgs

71x300x1000 mm- 300 kgs

26x300x1000 mm- 200 kgs

Regards

MANSI MALHOTRA

IMPORTS

Dear Sir,

We are looking for a gangway.

Please find dimensions and material should be aluminum with movable ends to accommodate low/high tide.

1. 10m    W.1.5m    H. Standard guardrail

Also, we need (5)nos. of pile guides as attached picture.

Diameter should be 46cm.

Best Regards,

KARIM SHAWKY  SITE COORDINATOR

Good day!

Kindly quote us following order:

The order is 35 Tones CK22 with customized heat treatment and impact strength test(notch V) . these are some information about the project .(they are rod obviously )

UT	Heat treatment		Grain size(ASTM E112)	quantity	Length	Diameter	Name	#
ASTM A388M	Stage 2	Stage 1	ASTM NO 9-12	35 Tons	4 or 6 m	55 mm	Steel CK22	1
	260   ͦC 2 hours tempered air	900    ͦC 1 hour quench in oil

            After heat treatment it needs to be these result in mechanical properties :

Impact energy (Notch V test)	Hardness(HB)	Elonaation	Yeild strength	Ultimate tensile strength
Min 170 J	Min 160	Min 27%	Min 380 Mpa	Min 510 Mpa

Also, How can we have some samples? Are you able to supply heat treatment then provide factory test report and impact test report ?

Your prompt reply would be highly appreciated.

Best regards,

Helen

Good morning,

Please send me a quotation for cold drawn round bar of AA2044 grade with diameters:

14×3000 h9 – 1000 kg
15×3000 h9 – 1000 kg

Monthly recurring deliveries.

Delivery address:

43-392 Międzyrzecze Górne
Miedzyrzecze Górne

Poland

 

—

Pozdrawiam,

Mateusz Koniarczyk

GOOD DAY

KINDLY QUOTE US FOR
  1050 M BLACK STEEL PIPE: 030MMX 2MM THICK STANDARD :BS1387:1985(EN 
10255:2004)
  4500MM BLACK STEEL PIPE: INSIDE025MMX 2MM STANDARD :BS1387:1985(EN 
10255:2004)
  900M ANGLE  IRONS: 40MM X 40MM X 5MM  STANDARD: B48B48-4 1972( 
SUPERSEDED BY BS EN 10056-1: 1999)
  300 INDUSTRIAL RUBBER WHEELS : 0350MM X 70MM WIDTH WITH TWO (2) X 6205 
BEARINGS
  105000MM BRIGHT DRAWN MILD STEEL SHAFT: 025MM
  9 SHEETS MILD STEEL PLATE
  1200 BY 2400MM X 1 200MM X 3MM
  15000MM WASHERS:INSIDE 026MM, OUTSIDE 050MM, 3MM THICK
  150KG STEEL ROD:04MM
  150LITRES MILD STEEL WELDING ELECTRODES:2MM STANDARD:AWS A5.1 E6013 
SANS 2560 E380RC 11
150litres red oxide steel primer paint

REGARDS

HILDA CHIKWAMA

Hi 

Dear Sir,

We’re Trade Co. located in USA and Egypt office and

On Behalf of our Steel and Aluminum Mills Customes  

we have big demand for immediate purchase orders of:

Aluminum Rod for communication 

1350 H 14 Aluminum 

communication cables

Quantity: 1000 MT

Specifications as per attached file 

Regards

MKS TRADE INC.USA

Mohamed Elkazaz

 

Rafael Artiles

Our company would like to purchase the following products from your
company-

Electrical cables PVC/Earth

Armoured Electrical cables

electrical earth lord cooper tape, 25mm x3mm

circuit breakers

please let us know the prices
Regards
Levy Alexandre M​​​​​​​​​​​​​​

Good day!

Please Quote us below items:

1. Specification of conductor:

• The conductor must be two times stranding and without back twist (torsion free)
• Stranding direction: inner layer z and outer layer s direction
• Coating thickness according to ASTM B298  standard (  table 1)
• Method of coating: electroplating

type	material	cross section area ( mm2)	stranding (no.x mm)	diameter of conductor(mm)	weight (g/m)	string diameter tolerance	resistance of plain wire(ohm/km)	length of twist of the first layer(mm)	length of twist of the second layer(mm)	construction of conductor	quantity(kg)	Price
conductor 0.15mm2 (with silver coated)	Annealing copper (rate of anneal>15%)	0.15	19×0.1	0.5	1.32	±0.003	120	4.8-6	8-10	1+6+12	100
conductor 0.2mm2 (with silver coated)	Annealing copper (rate of anneal>15%)	0.2	19×0.12	0.6	1.9	±0.003	84	5.8-7.2	9.6-12	1+6+12	100
conductor 0.35mm2 (with silver coated)	Annealing copper (rate of anneal>15%)	0.35	19×0.154	0.77	3.14	±0.003	52	7.3-9.1	12.2-15.2	1+6+12	151
conductor 0.5mm2 (with silver coated)	Annealing copper (rate of anneal>15%)	0.5	19×0.18	0.92	4.49	±0.003	36	8.7-10.9	14.16-18.2	1+6+12	100
conductor 1mm2 (with silver coated)	Annealing copper (rate of anneal>15%)	1	19×0.26	1.3	8.96	±0.003	18	12-15	20-25	1+6+12	100

1. Spec of wire:

• Method of coating: electroplating

 

type	material	rate of anneal (%)	preferred diameter (mm)	weight(g/m)	coating thickness(µm)	quantity(kg)	Price
Wire 0.102mm (shield)	tin coated copper	≥6	0.102	0.072	According to ASTM B33	269

 

Your prompt reply would be highly appreciated.

Best regards,

Amanda Wang

Hello Sir/Madam
Good days to you.
We are a procurement & Logistics company with a chain of clients with whom we do procure for them goods and services within the Great Lakes Region of East and Southern Africa. In this regards, we are looking for a manufacturer or supplier for the following below:

CAT 6 NETWORK CABLES

So please confirm the prices in Euro/USD for the above with terms CIF  to Dar el Salaam Port /of Tanzania(East Africa) There after we shall discuss with our client and then forward to you the details in which you will issue a proforma invoice.

Awaiting for your swift response towards establishing long term relationship with your prestigious company.
Best regard

Ronnie Kabuye